Security camera systems, whether installed at home or in public places, are growing in popularity. There are numerous surveillance solutions available, most of which boast convenience and affordability. An attractive trend is wireless security cameras because they are relatively easier to install and maintain. However, just because you can do it yourself, doesn’t necessarily mean you should. Before installing your wireless security cameras, take a look at these common mistakes so you can avoid them.
Number Of Cameras
You may think that investing in a single PTZ (pan/tilt/zoom) camera will save you money because it has capabilities to expand your viewing range. Unfortunately, this camera may not get all the angles, and zooming in and out may not always produce the best picture. Instead, purchase enough security cameras to cover the different areas you wish to monitor around your property.
Aside from installing enough cameras, positioning plays an important role in adequate surveillance. Things to consider are lighting conditions and possible obstructions. You don’t want your video footage to be washed out from too much light during the day, nor do you want any branches or bushes blocking your view.
You should also be mindful of placing your cameras where there is reliable Wi-Fi signal. Without it, your live feed could be choppy and may not be connected at all times. If the Wi-Fi signal is poor in an area where you need a security camera, there are Wi-Fi extenders that you can purchase, or some security cameras have these technologies already built-in.
Because these cameras do not need to be physically connected to a router or Ethernet port, they are considered wireless. However, the power source is a different story. While most wireless security cameras are powered by batteries, others need to be plugged in. If that is the case with your cameras, be sure that power outlets are close by and accessible.
Since your wireless cameras will be connected to your network, it’s better to be safe than sorry. Your network should have a secure encryption configuration and a strong password to access it. Aside from that, your cameras should have specific passwords that are necessary to input during set up and installation. Most cameras come with default usernames and/or passwords, but it is pertinent that these be changed immediately to prevent hacking or unauthorized access. Passwords should be complex, but relatively easy for you to remember.
If you are looking to remotely access your surveillance feed, you will want to make sure that your wireless security cameras provide that option. More specifically, determine how you want to access your feed (ex. via web browser), and double check your cameras specifications to find out whether this is possible or not. Also, you will want to check the compatibility with your devices (ex. supports iOS, Android, or both).
Shop our selection of wireless security cameras, CCTV camera packages, equipment and more online, or give us a call at 1-888-203-6294.
Carefully and strategically employed security camera systems can help protect your property and your loved ones. It is a wise choice to invest in the safety and protection of your family and assets with a security camera system.
If you are opting for a wired security camera system, an important aspect of your installation is your cabling. Yes, you want everything connected properly, but you also want to protect your wires and cables. If potential criminals can access your wires, they can easily cut them and disable your system. Don’t be a victim – protect your security camera system with these tips.
Paint The Wires
An easy way to keep your wires hidden is to install them close and tight to the baseboards or where the wall meets the ceiling. Once you get the wires as flush to the surfaces as possible, use the same color paint to camouflage your wires. While they are still vulnerable, they are harder to spot.
Behind The Baseboard
Running the wire behind the baseboard is a relatively simple procedure that offers more protection. Start by gently removing the baseboard so as to not damage it if you will be using it again. Then, press the wire into the gap between the wall and floor. You may use a putty knife to ensure that the wires are as far back as they can go to avoid getting caught by the edge of the baseboards. Once they are in place, you may return the baseboards. The downside is that you will have to remove the baseboards again if there is some sort of electrical malfunction requiring you to access your cables.
Running your wiring through plastic tubes through your wall is likely the best protection for your wiring, but also the most intrusive. This method not only hides your cables, but also protects it from the elements, rodents, and insects. If you decide to go this route, it’s best to get assistance from professionals. At SecurityCamExpert.com, we offer installation services and cable runs at competitive prices for your convenience. Contact us for a free quote or to schedule an appointment today.
To avoid wires and cables all together, you can opt for a wireless security camera system. We offer a great selection affordable wireless security cameras and surveillance equipment. Feel free to visit us online or call 1-888-203-6294 for more information.
When it comes to security systems, there are many options to consider. How many security cameras do you need? Which type of security cameras do you need? How much memory will you need for the DVR? The questions can go on and on. An important decision comes down to choosing a wired or wireless security camera system. While both have their own benefits and downfalls, it all depends on your needs and the environment you’ll be surveying.
First, it is important to evaluate your environment. Will you be monitoring your home or an office? Which areas are of concern to you? Answering these questions beforehand will give you a better idea of what you really need, simplifying the buying process.
Regardless of what you are shopping for, knowing your budget and sticking to it is important. How much can you spend and how much are you willing to spend? In combination with your needs, this can determine whether or not you go wired or wireless.
For wired security camera systems, everything is physically connected. While this provides a fairly secure connection, a simple cutting of the wires can disable the entire system. Luckily, most wired security systems may sound an alarm when wires are cut. Also, most people opt to hide wiring behind walls or underground for appearance purposes as well as security system protection. Depending on how you see it, having to plug into a power source can be either a blessing or a curse. Your system will always be connected, but power outages may pose a problem.
For wireless security camera systems, wireless transmission makes for an easier set up and installation. Eliminating the need for wiring and cabling can save some money also. The wireless aspect does, however, leave the security system open to interference from other wireless systems, either triggering false alarms or compromising the system overall. Still, on the other hand, wireless security camera systems are much more convenient for relocating than wired security camera systems.
It is also best to know that since wireless systems are based on wireless transmissions, signals may not reach as far. Wired security camera systems can be adjusted with different cable lengths. Thus, for larger homes, a wired security system may be better suited. Likewise, wireless security systems may work better is smaller spaces.
As discussed, both wired and wireless systems have their advantages and disadvantages. Be sure to examine your needs, budget and which aspects work for you.
At SecurityCamExpert.com, you’ll find both wired and wireless security camera systems. If you have questions or need further assistance, please contact us at 1-888-203-6294. Our staff is knowledgeable and happy to help.